Total length 6000mm * mesh belt 800mm (outer width 920mm) * height 750mm (The furnace shell length is 1500mm * The UV part length is 1500mm, and the furnace shell height is 380mm) Capacity: 380V voltage total capacity: about 17KW
Oven part:
Material body: Tripod is made of square iron material 40 * 40mm thick 1.5 mm. Legs equipped with adjustable angle cup; Beams: Made of square iron welded 40mm * 40mm * 1.5mm thick; Drying kiln: Made by bending 1.5mm thick cold rolled sheet. The surface of anti-rust and surface paint; 5KW. A total of 1 part; (each piece is equipped with a 375w long-range high-temperature motor with 8 inch stainless steel wind wheel. A total of 1 set) Furnace material: 201 stainless steel plates 1.0mm thick. (1.22m * 2.44m); Insulation system: 80K aluminum silicate cotton insulation 100mm rock wool; Temperature control system: Heating device uses infrared heating lamp, normal use temperature, adjustable from normal temperature to 100 ° C, with infrared electric heating lamp. It has the advantage of heating and fast heating. Diesel. Machine tail sealing plate: made by bending and welding with cold sheet 1.2mm thick; UV part used: 5.6KW lamp. UV with transformer, electrofusion, lampshade (2 sets), UV exhaust pipe is a high temperature fan outside 300W core to suck air, UV furnace shell is made by bending rolling plate. cold 1.5mm thick. Paint appearance (color: white computer); Plate of tunnel kiln: 1.0mm thick galvanized sheet. (1.22m * 2.44m); Conveyor system: Conveyors use Teflon mesh belt with errors below 250 degrees. The main drum of the machine uses ¢ 160mm embossing roller, the main tail of the machine uses 60mm embossing roller. Speed control: Three-crystal 1P inverter is equipped with Shengjie one-piece 400w motor. String is composed. Speed is adjustable. Electronic control system: total system switch, AC contactor Temperature control panel with digital temperature control panel. Voltmeter. Current meter, switch. Lights. High temperature resistant wire. A group of electrical switches.
Tunnel oven plus UV part:
UV part: Lamp 5.6KW.UV with transformer, fuse, lampshade (1 set) 3KW. UV lamp with transformer, electric, lamp (1 set) UV exhaust is exhausted by high temperature fan outside 300W core. UV cover is made by bending a 1.5mm thick cold rolled sheet. Paint appearance (color: white computer); total length 1200mm