FSM-6000LE TEMPERED GLASS SURFACE STRESS METER

cProduct details:

THE PRODUCT INTRODUCTION:
Stress meter, glass stress meter, tempered glass surface stress meter, tempered glass edge stress meter, fully automatic online analytical stress meter, PC plastic stress meter, PET product stress meter, etc.
The tempered glass stress meter FSM-6000LE has small automatic measurement error. It is widely used in chemical flat glass manufacturers such as LCD screens and touch panel manufacturers.
The FSM-6000LE is used to measure the surface stress of chemically strengthened and physically strengthened glass. By letting light propagate along the surface of the glass, the stress on the surface and the depth of the stress layer are measured according to photoelastic techniques. This machine is equipped with a computer, which can reduce the error of the measurer and facilitate the management of the measurement data.
The FSM-6000LE is easy to use and operate. It not only shortens the time required for the measurement process, but also monitors the glass production process in a timely manner. The machine analyzes the surface stress of the chemically tempered glass very well and judges the degree of tempering of the product
 
THE CHARACTERISTICS:
1. It has the only measurement method (the principle of photorefractive analysis of refractometer) that is not available in other models.
2. Automatic measurement, the personal error caused by the tester is small.
3. Ability to save data with a computer for quality management.
4. Samples with poor test conditions can be measured manually.
5. Using LED light source, it has a long service life of 10,000 hours (previously 500 hours).
6. The glass calibration plate is used to minimize machine error. 
 
PARAMETER:
Measuring range: 0-1000Mpa
Measurement accuracy: ±20Mpa
Measuring range (stress layer depth): 0-200μm
Accuracy (stress layer depth): ±5μm
Light source: dedicated LED wavelength 590nm ± 2nm
Measurement object: chemically strengthened glass
Measuring shape: flat glass 10×10mm or more
Prism: S-LAL-10 ND=1.72
PC: dedicated (OS, measurement software installed
OS: Windows XP Professional
Light source: FSM-LED590
Power supply: AC100V /200V 3A
Size: 300 × 600 × 250 (measuring head) Weight: 14KG
200×400×400 (PC) Weight: 5KG
250×400×400 (monitor) Weight: 3KG 
 
PRECAUTIONS FOR USE:
1. Please use the consumables (that is, the original refractive index of 1.64 refractive index of GS-1) of ORIHARA to avoid damage to the prism.
2. Please handle the machine gently and gently put the sample to avoid damage to the prism part; when the detection image is not clear, please wipe the prism surface and slope with a cotton swab stick with industrial alcohol.
3. When using this machine, be sure to eliminate the floppy disk or hard disk connected to the Internet and LAN and the USB interface containing the virus.
4. Please use the machine indoors to avoid strong light, indoor air should not be too humid, and the pH should be moderate.
5. Please stay away from other chemicals.
6. If an abnormal situation occurs during use, please contact the relevant supplier immediately.
7. Please keep the original factory manual and related factory report documents.
8. This machine supplies "NA/10 sodium lamp", please replace the new accessories after the end of life and continue to use.
9. Please be sure to save the password dog of the original machine of this machine.
10. Please operate the computer configuration of this machine correctly. Do not force the shutdown at will, so as not to cause the computer to be destroyed.
 

Contact:

越南锐拓仪器设备有限公司
地址：北宁省， 桂武市， 凤毛坊， 张定路，160号
电话：0328486893/中文：0394274737
邮箱：ruituovietnam@gmail.com