RTS-150 Thermal shock chamber

Huanrui is a reliability testing manufacturer with 20 years of experience. Both thermal shock chamber and high and low temperature test chambers ,environmantal chambers are available in various sizes

The thermal cycle or cold cycle test is used to evaluate the product's repeated resistance to high and low temperatures and the chemical change or physical damage of the product during thermal expansion and contraction, which can confirm the quality of the product.

Feature

• Perfect modeling upgrade, simple operation of the panel interface.

• Equipped with RS-232 communication interface device, which can simultaneously monitor and record LAN connection with personal computer.

• When an abnormal situation occurs, the operation screen automatically displays the cause of the failure and provides a solution.

• Equipped with an emergency stop device.

  Model		RTS-50	RTS-80	RTS-100	RTS-150	RTS-200	RTS-300	RTS-480
  System		(BTC) Balanced temperature control system
  High temperature zone		+60℃~200℃ Optional
  Preheating time		+60℃~200℃ About 20 minutes
  Low temperature zone		-55℃~10℃,    -70℃~10℃,   -80℃~10℃
  Precooling time		+20℃~-55℃  60 minutes,  +20℃~-75℃  75 minutes,  +20℃~-80℃  90 minutes,
  Testing zone		-40℃~150℃,    -55℃~150℃,   -65℃~150℃
  Recovery time		Within 5 minutes, heat exposure 30 minutes, low exposure 30 minutes,
  Transfer time		Within 10 seconds
  Temperature flucturation		±1.0℃
  Temperature deviation		≤±2.0℃
  Interior dimension(cm)	W	40	50	55	68	68	80	80
  	H	40	40	45	45	50	50	55
  	D	32	40	40	50	60	75	93
  Test weight (KG)		3.5	5	5	5	10	12	15
  Interior material		SUS#304 Stainless steel plate
  Exterior material		Backed paiting steel or stainless steel(SUS304)
  Insulation material		Rigid polyruethane foam +glass fibre
  Floor bearing load		500Kg/m3
  Refrigeration system		Air cooled (Water cooled type is option)
  		Cascade type, hermetic/semitight compressor,CFC free refrigerant
  Controller		Color LCD screen in English/Chinese, programing,communicating function
  Safety devices		No welding wire switch,compressor overheating and over current protection,over temperature protection, blower overload protection,dry heating machine protector,low water protection,fault warning system.
  Power		AC380±10% 50HZ 3 phase 4 wires+ground wires