Product name: Dust particle counter Product code: KANOMAX3887C Made in Japan
Japan's dust particle counter is cost-effective and is a popular portable dust particle counter on the market. The 3-channel particle size (0.3, 0.5, 5.0 m) can be tested simultaneously. - For GB / T16292-2010 test standard, the device has an integrated national standard test mode, which can calculate UCL value directly. - Internal delay check time, can be set to avoid noise - Shortcuts can be set, checked by one click, simple and convenient - 10,000 test data can be stored - The size of the palm. Compact and easy to carry
Specifications:
Test particle diameter: 0.3, 0.5, 5.0 mm Light source: laser diode Effective counting: See JIS B9921 Zero: See JIS B9921 Flow rate: 0.1cfm (2.83L / minute) Sampling time: 1 second ~ 99 minutes59 seconds Sampling frequency: 1 to 99 times or continuously Count alarms, ranging from 1 to 70 million Test method: Single / Repeat / Continuous / Calculation / Remote / GBMODEL (FS-209E) Display: 20 characters, 4 lines LCD Error signs: Super max count, laser power reduction, super calibration (± 5%), low battery Display; RS-232C or RS-485 (can be selected in the menu), RJ-11 is connected to N.BRS-485 which is used to connect step Communication speed: 9600bps Cache: 10000 data (when set in calculation mode, an experiment is considered 2 data) Power: 4 pin 5, Ni-MH battery (4.8v-1.6Ah) or AC adapter (input is 100 ~ 240V), it is recommended to charge the battery with a special charger Battery working time: Continuous test time is about 3 hours (Ni-MH battery) Size: 108 (W) × 68 (D) × 196 (H) mm Weight: about 680g (without battery) Working environment: Ambient temperature: 10 ~ 35 ° C Standard accessories: AC adapter, filter zero, tube, operating instructions, charger, battery charger: (1.2V-2000mAh or 2100mAh) × 4, communication software, communication cable Optional: printer and cable, handheld protection box, tripod