SEFAR CK100 strain gauge

Product Name: CK100 strain gauge mesh tension meter
Product model: CK100
Manufacturer: Switzerland

Accurate measurement ：

Measuring ranges from 30 Newton / cm or more are displayed at a resolution of 0.5 N / cm; Measurements under this range are displayed at a resolution higher than 0.2 N / cm. SEFAR Tensocheck 100 improves the accuracy of screen tension.

Wide display range ：

SEFAR Tensocheck 100 is 4 to 60 N / cm in size and is a good measurement tool for many screen sizes.

Digital screen ：

The measured value is displayed at a size of 10 mm, very clear and easy to read even at a distance.

Unit of measurement conversion ：

You can choose to display units in Newton / cm and millimeter. This option makes SEFAR Tensocheck 100 suitable for use worldwide.

Auto-off function ：

If no measurement is made for three consecutive minutes, the device will automatically turn off to save electricity.

Surgery room:

Tensocheck 100 is easy to operate and does not require expertise.
SEFAR Tensocheck 100 provides the following benefits for Extended Parts:

Accurate tension ：

SEFAR Tensocheck 100 uses weight and deflection to calculate tension. It is much more accurate than traditional spring strain gauges. In addition, large digital displays with a stretch resolution of 0.2 to 0.5 N / cm also increase accuracy. With the SEFAR Tensocheck 100, the tension values ​​can be read easily and accurately to reproduce the tension screen consistently.

Stress regeneration:

The SEFAR Tensocheck 100 weight deviation measurement also helps achieve tension repeatability for different displays. When spring age, the precision of a spring tension gauge can decrease over time. The weight deviation and SEFAR Tensocheck 100 structure do not have this problem. This feature ensures accurate web strain measurement and gives the printer the ability to measure screen tension accurately.
Stress reliability:
If the customer has a high quality control requirement, buy the SEFAR Tensocheck 100 with the control panel and use the control panel to check the accuracy of the SEFAR Tensocheck 100 before each extension. The equipment is returned to the manufacturer for calibration when it is found that the tensiometer is outside the control panel tolerance. This also saves the time and cost needed for the annual calibration process.
ISO 9001 quality system requires periodic inspections by approved measuring agencies for control panels.
Specifications:
Size: 80 x 95 x 115 mm
Weight (including battery): 1.01 kg (including battery)
Battery: 9 volts (6LR61)
Display range: 4 Cyclone 60 N / cm
Resolution:
Within the range <30 N / cm: 0.2 N / cm
Within> 30 N / cm: 0.5 N / cm
Right-wrong:
Measuring range 10 - 19.8 N / cm: ± 0.4 N / cm
Measuring range 20 - 29.8 N / cm: ± 0.6 N / cm
Measuring range 30 - 39.5 N / cm: ± 1.0 N / cm
Measuring range 40 - 50.0 N / cm: ± 1.5 N / cm 

Contact:

越南锐拓仪器设备有限公司
地址：北宁省， 桂武市， 凤毛坊， 张定路，160号
电话：0328486893/中文：0394274737
邮箱：ruituovietnam@gmail.com