Paint tester for grinding vibration

Product name: Paint vibration tester
Product code: 180/530 TE-30

Brief introduction:

This vibrator is manufactured by our company based on many years of experience and reference to ROSLER prototype of Germany. The machine is used for surface abrasion testing of mobile phones, with high reliability, simple operation and long service life, and machines through joint ventures between China and Italy. Therefore, the engine to ensure its anti-wear coefficient and the original abrasion resistance factor of ROSLER machines of Germany are suitable and the price is very low, economical and unanimously accepted by most customers.
Vibration motor capacity of 1.1 horsepower (engine joint venture between China and Italy); Speed: 2850 rpm. Frequency: 50HZ Voltage: 380V
Coil springs, rubber screws and nuts
Wear the test slot
Two-way exit
Enter the country into the solution port
Other: four rubber feet on the bottom, rubber hose parts.

1. Purpose:

The purpose of vibration and wear testing is to place the product on a special abrasive machine and use special abrasive particles to simulate the wear of the sample under normal use conditions. This test is only available for all workpieces (such as cell phones with batteries). In the product development phase, the plastic model of the product can be tested for wear and tear to evaluate the product.

2 . Request:

Equipment used is Opry groove vibrator.
Vehicles used:
- Yellow hat: German Rösler wears RKF 10K beads
- Green pyramid: Rösler of Germany wears RKK 15P beads
- Cleaner: German Rösler Cleaner FC 120
- The sample must be the whole product (for example, the phone model must contain a button board and battery, not an incomplete case)

3. Check details:

- Visual inspection
- In the report of wear test results, the time of use of wear and tear media should be included. Accurate usage time of wear and tear environment is calculated as follows: previous test time (6 hours) + time used before this test

Contact:

越南锐拓仪器设备有限公司
地址：北宁省， 桂武市， 凤毛坊， 张定路，160号
电话：0328486893/中文：0394274737
邮箱：ruituovietnam@gmail.com