越南锐拓仪器设备有限公司
地址：北宁省， 桂武市， 凤毛坊， 张定路，160号
电话：0923601989/中文：0394274737
邮箱：ruituovietnam@gmail.com
Facebook：瑞拓越南
外部链接：www.szxhs.com
2
Product name: Abrasion testing machine
Product code: 9600
Manufacturer: China
This machine is designed and manufactured according to Taiwan's "stm1966 * 2058 friction verification rules". It is made of high quality aluminum alloy fixtures and precision parts. Accurate structure, delicate and beautiful shape, and technical content is a leading position among similar products.
This machine is suitable for all types of surface injection products and printed font life testing. With adjustable speed and intuitive speed display during testing, it can set the number of tests at the same time and has energy-saving memory function, accurate test results and simple and easy operation.
Specification:
Maximum adjustment: 0-50mm adjustment
Speed: 1-60 times / minute (roundtrip) is adjustable
Friction hammer: rubber, alcohol, pencil, various fixtures, and also equipped with weight
Counter: up to 9999 times
Total capacity: 30W
★ capacity: AC220V 50 / 60Hz
Size: 550 * 400 * 330mm (length * width * height)
Operating manual:
Before testing, the remaining paint scratches in the previous eraser are smoothed with rough sandpaper.
If you need to change the test device, you can change the alcohol under the slider. Artificial sweat. Rub cloth or eraser.
Put the weight of the specified weight on the friction bar
The sample to be tested shall be clamped and fixed at the test site.
Before turning on the power, the number of counters must be set in advance, adjustable from 0 to 9999 times. If the counters are zero, the machine cannot run.
Adjust the number of tests and speed from 0 to 60 speeds
The machine runs to the bottom part and turns off the engine speed immediately, which is the amount of anti-wear.
If you need to pause or return to zero, turn off the speed switch.
The test strip can be adjusted according to the height of the sample.
Adjust friction distance at a minimum of 10 mm, maximum 50mm
If you need to adjust the friction distance, seal the back of the machine, remove the central shaft screw below the engine and adjust the required distance before locking the screw.
Contact:
越南锐拓仪器设备有限公司
地址：北宁省， 桂武市， 凤毛坊， 张定路，160号
电话：0923601989/中文：0394274737
邮箱：ruituovietnam@gmail.com
Facebook：瑞拓越南
外部链接：www.szxhs.com
2
DUE THAC VIET NAM INSTRUMENT EQUIPMENT COMPANY LIMITED
- 越南DUE THAC仪器设备有限公司
Contact information
越南锐拓仪器设备有限公司
地址：北宁省， 桂武市， 凤毛坊， 张定路，160号
电话：0923601989/中文：0394274737
邮箱：ruituovietnam@gmail.com
Facebook：瑞拓越南
外部链接：www.szxhs.com
2
Map
Use of this website and the services means you agree to our Terms of Use and Privacy Policy.